Embedding Cassettes and Storage
Thomas Scientific Cassette, Tissue Embedding with Attached Lid, 35ø Writing Area, BLUE, 500/Dispenser Box, 2 Boxes/Unit
The 35Ý angled cassette features a large writing surface and two side panels ideal for labeling. The one-piece design allows for the lids to be opened and closed repeatedly without the lid getting detached from the base. The lid securely locks into the base and keeps samples safe and secure. The 35Ý angled cassettes can be manually loaded into most cassette printers. Extra large textured writing surface Wide finger tab on the back of the cassette for easy opening The lid stays attached for repeated opening and closing
Electron Microscopy Sciences Embedding Cassette with 6-Compartments, Lilac
Made from Acetal Polymer. These biopsy cassettes can hold up to six tissue specimens, each one placed in it's own compartment, numbered from 1 to 6 . Cover and base have over 3000 0.36 mm square openings. Cassettes keep specimen safely submerged in solvent and are totally resistant to the most histological solvents. The efficient flow-through slots maximize fluid exchange and insure proper drainage. The one-piece integral lid eliminates the need for separate steel lids. Large labeling areas are located on three sides of the cassette. The anterior writing area is at a 45 degree angle, making the cassette, to some degree, able to be used with certain types of cassette labeling instruments.
Each case contains 42 dispenser boxes of 250 cassettes with covers assembled.
Color: Lilac
Electron Microscopy Sciences Slotted Cassette with Lids Attached, Blue
Made from Acetyl Polymer, which is a special high density polymer that keeps specimens safely submerged in solution. These cassettes are totally resistant to most histological solvents and their slots offer maximum flow through for good fluid exchange and proper drainage. The lids either come attached to the cassette or are packaged separately. The lids can be opened and closed as often as necessary and they always relock securely without danger of specimen loss. Large labeling areas are located on three sides of the cassette for your convenience. Each slot measures: 1x5 mm. Contains three dispenser boxes of 500 cassettes.
Color: Blue
Electron Microscopy Sciences Embedding Bar 4 wells 9 mm Deep, 20 x 20 mm
Stainless steel well bars for precision embedding techniques addressing the most difficult embedding tasks.
Size: 20 x 20 mm
Electron Microscopy Sciences Tissue-Tek Mesh Biopsy Cassette, Yellow
Tissue-Tek Mesh Biopsy Cassette System is now the easier, ideal way for processing the smallest of biopsy specimens. Using Tissue-Tek Mesh Biopsy Cassettes, you avoid reagent carryover in the tissue processor and you eliminate the structural artifacts usually caused by sponge and tea bag abrasion. They also allow direct specimen filtration into the cassette and facilitate embedding.
Flow-through improved by large venting slots.
Easy visualization and safe specimen containment facilitated by a mesh screen with blue tint.
Tongue-and-groove seal sorrounds entire specimen.
Rounded inner walls allow for easier removal.
Color: Yellow
Model: 4308
Electron Microscopy Sciences JB-4™ Solution A 800 ML
A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent; therefore, complete dehydration through 100% ethanol is not necessary (although recommended for large or dense tissues). Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.
Electron Microscopy Sciences Lowicryl K4M Monostep 225 GR
The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing. This pre-mixed, ready to use resin, saves you time and minimizes chemical contact. MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling. Store at room temperature.
Electron Microscopy Sciences JB-4™ Catalyst 12 GR
A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent; therefore, complete dehydration through 100% ethanol is not necessary (although recommended for large or dense tissues). Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.
Electron Microscopy Sciences Lowicryl HM20 Kit
Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60 degree C. Nonpolar (hydrophobic) usable to -70 C.
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.
Electron Microscopy Sciences Stainless Steel Autopsy Cassette
Made from stainless steel. It is fully perforated allowing for free movement of fluids. It comes with a snap-cap which provides positive enclosure.
Electron Microscopy Sciences BEEM Block Storage
A two tone color coded plastic box with insert, which allows for the storage of up to 10 blocks in the numbered cavities.
Electron Microscopy Sciences Gelatin Capsule Holder for Size "00"
Made from durable polyethylene. It accommodates 15 gelatin capsules size "00". The whole capsule is exposed to allow for even heat and/or UV light distribution during polymerization.
Electron Microscopy Sciences Embedding Ring, Yellow
Molded from the highest quality plastic, our Embedding Rings fit most base molds. The large writing surface further eases identification and handling. The base measures 1 5/8" x 1 1/8" and the ring measures 1" x 1" (25 x 25 mm).
Electron Microscopy Sciences Embedding Ring, Blue
Molded from the highest quality plastic, our Embedding Rings fit most base molds. The large writing surface further eases identification and handling. The base measures 1 5/8" x 1 1/8" and the ring measures 1" x 1" (25 x 25 mm).